|
|
| (9 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| ==Mini210 | S5PV210 ARM Cortex-A8 Board==
| | *[[Mini210 Overview]] |
| FriendlyARM Mini 210 SBC (Single-Board Computer) with 1 GHz Samsung S5PV210 ARM Cortex-A8 processor. The board measures 130 x 115 mm, ideal for learning about ARM Cortex-A8 systems.
| | *[[Mini210 Hardware Specification]] |
| | | *[[Creating the SD boot card]] |
| [http://www.friendlyarm.net/downloads#schematics Mini210 Schematics]
| | *[[System Installing]] |
| | |
| ==Specification==
| |
| *Dimension: 130 x 115 mm
| |
| *CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
| |
| *RAM: 512 MB DDR2 RAM, 32 bit Bus
| |
| *Flash: 1GB NAND Flash
| |
| *EEPROM: 256 Byte (I2C)
| |
| *Ext. Memory: 2x microSD-Card socket
| |
| *Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
| |
| *IR: Infrared Receiver
| |
| *USB: 1x USB-A Host 2.0, 1x miniUSB Slave/OTG 2.0
| |
| *Audio Output: 3.5 mm stereo jack, connector for a speaker (Class D Amp)
| |
| *Audio Input: Condenser microphone
| |
| *Ethernet: RJ-45 10/100M (DM9000)
| |
| *WiFi/WLAN: onboard SD-WiFi with ceramic antenna
| |
| *RTC: Real Time Clock with battery
| |
| *Beeper: PWM buzzer
| |
| *Camera: 2x 20 pin (2.0 mm) Camera interface
| |
| *TV Output
| |
| *Monitor: miniHDMI (type C)
| |
| *LCD Interface: 50 pin (2.0 mm) and 41 pin (1.0 mm) connector for FriendlyARM Displays
| |
| *User Inputs: 8x push buttons and 1x A/D pot
| |
| *User Outputs: 4x LEDs
| |
| *Expansion: 40 pin GPIO (ADC, I2S, I2C, SPI, PWM, IO...), 20 pin SDIO (SD, SPI, I2C), 20 pin Buttons (2.0 mm) | |
| *Debug: 10 pin JTAG (2.0 mm)
| |
| *Power: regulated 5V (DC-Plug)
| |
| *OS Support
| |
| **Linux 2.6
| |
| **Android
| |
| | |
| ==Board==
| |
| [[File:Mini210_1.jpg]] | |
| [[File:Mini210_2.jpg]] | |
| [[File:Mini210_3.jpg]] | |
| [[File:Mini210-50_1.jpg]] | |