|
|
| (33 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| | | *[[Tiny210 Overview]] |
| == Overview ==
| | *[[Tiny210 Hardware Specification]] |
| * 1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine | | *[[Creating the SD boot card]] |
| * 512MB DDR2 RAM and 1GB NAND Flash | | *[[System Installing]] |
| * LCD/Touch Screen, HDMI,TV out, Audio support
| |
| * TF card, USB Host/OTG support
| |
| * Ethernet, WiFi, serial port, GPIO
| |
| * Contain CPU board
| |
| * Linux 2.6.35 & Android 2.3 support
| |
| | |
| | |
| == CPU board Hardware info ==
| |
| CPU: 1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
| |
| | |
| DDR2 RAM: 512MB DDR2 RAM, 32bit data bus, 200MHz
| |
| | |
| FLASH: SLC NAND Flash: 256MB/1GB
| |
| | |
| Multi-IO:
| |
| *2 x 60 Pin 2.0mm space DIP connector
| |
| * 1 x 30 Pin 2.0mm space DIP connector
| |
| * 1 x 51 Pin 1.0mm space SMD connector | |
| | |
| on Board:
| |
| HDMI interface
| |
| 4 x User Leds(Green)
| |
| 1 x Power Led(Red)
| |
| | |
| Supply Voltage from 2V to 6V
| |
| Mechanical: Dimension: 64x 50x 11mm
| |
| Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7
| |
| | |
| | |
| == Tiny210Mother board ==
| |
| | |
| # Integrated USB 2.0 Hub: Extended 4 USB host ports, three of them as the standard side port,and one was lead by SCON interface
| |
| # AV CCD Camera In: Integrated TVP5150 video chip: 2 AV input port (RCA), can be directlyconnected using a CCD camera
| |
| # RS485: 1 RS485 interface
| |
| # Serial Port: 4 serial port, two of them have been converted to RS232, and leads through the
| |
| DB9 Block (COM0, COM1), through the CON1, 2, 3, 4, Block leads to TTL level
| |
| # keys: 8 key
| |
| # RJ45 Ethernet port: using DM9000AEP, 10/100M adaptive
| |
| # Audio input and output: using the WM8960 professional audio chip, containing Class D amplifier on-board microphone, and supports HDMI audio and video synchronization output
| |
| # USB Slave: 1 Road, the USB 2.0 specification
| |
| # Infrared receiver: 1
| |
| # ADC input: 6 ADC input
| |
| # Buzzer: 1, control by the PWM0
| |
| # EEPROM:AT24C08 (256 Byte) for I2C test
| |
| # LCD Interface: 2 LCD interface, both 40 Pin 0.5mm Pitch Chip Block, support 3.5 "-19" fullcolor TFT display LCD
| |
| # SDIO interface: used to connect the SDWiFi module and other
| |
| # CMOS Camera interface: used to connect CMOS camera
| |
| # RTC clock: with a backup battery (according to different regions or time periods, mailing may remove the battery)
| |
| # PCB layer: 2
| |
| # PCB size: 180 x 130mm, can be easily fixed all kinds of LCD modules, especially the 7-inch LCD module
| |
| # Power supply: DC-5V
| |