|
|
| (10 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| ==Micro2440 | S3C2440 ARM9 Stamp Module==
| | *[[Micro2440 overview]] |
| FriendlyARM Micro 2440 Stamp Module with 400 MHz Samsung S3C2440 ARM9 processor.
| | *[[Micro2440 Introduction]] |
| | | *[[Micro2440‘s settings and connections]] |
| [http://www.friendlyarm.net/downloads#schematics Micro2440 Schematics] | | *[[The function and usage of BIOS in Micro2440]] |
| | | *[[Installing WinCE in Micro2440]] |
| ==Specification: Stamp Module==
| | *[[Installing Linux in Micro2440]] |
| *Dimension: 63 x 52 mm | |
| *CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz) | |
| *RAM: 64 MB SDRAM, 32 bit Bus
| |
| *Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS
| |
| *Serial, SPI, USB, LCD, CMOS Camera Interface | |
| *Analog Input and Output
| |
| *User Outputs: 4x LEDs
| |
| *Expansion headers (2.0 mm)
| |
| *Debug: 10 pin JTAG (2.0 mm)
| |
| *OS Support
| |
| **Windows CE 5 and 6
| |
| **Linux 2.6
| |
| **Android
| |
| | |
| ==Specification: SDK-Board==
| |
| *Dimension: 180 x 130 mm
| |
| *EEPROM: 1024 Byte (I2C)
| |
| *Ext. Memory: SD-Card socket
| |
| *Serial Ports: 3x DB9 connector (RS232)
| |
| *USB: 4x USB-A Host 1.1, 1x USB-B Device 1.1
| |
| *Audio Output: 3.5 mm stereo jack
| |
| *Audio Input: 3.5mm jack (mono) + Condenser microphone
| |
| *Ethernet: RJ-45 10/100M (DM9000)
| |
| *RTC: Real Time Clock with battery
| |
| *Beeper: PWM buzzer
| |
| *Camera: 20 pin Camera interface (2.0 mm)
| |
| *LCD: 41 pin connector for FriendlyARM Displays and VGA Board
| |
| *Touch Panel: 4 pin (resistive)
| |
| *User Inputs: 6x push buttons and 1x A/D pot
| |
| *Expansion headers (2.0 mm)
| |
| *Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
| |
| | |
| ==Stamp Module==
| |
| [[File:Micro2440_1.jpg]] | |
| [[File:Micro2440_2.jpg]] | |
| | |
| ==SDK-Board + Stamp Module==
| |