Arduino MP3 shield board with TF card - Revision history

Admin: /* Usage */

2014-09-01T05:45:42Z

Usage

← Older revision		Revision as of 05:45, 1 September 2014
Line 44:		Line 44:
	After connecting your Arduino to the VS1053 breakout board, insert the TF card which stores your mp3 files with the filename like "track001.mp3", "track002.mp3" and etc into the TF card slot.<br>		After connecting your Arduino to the VS1053 breakout board, insert the TF card which stores your mp3 files with the filename like "track001.mp3", "track002.mp3" and etc into the TF card slot.<br>

	Download the [[File:~~MP3Shield_Library_Demo~~.~~rar~~]] and put them in the folder /Arduino1.0/libraries/, then open the Arduino IDE 1.0 and upload the examples MP3Shield-Library-Demo.		Download the [[File:MP3-TF.zip]] and put them in the folder /Arduino1.0/libraries/, then open the Arduino IDE 1.0 and upload the examples MP3Shield-Library-Demo.

Admin at 07:57, 3 July 2014

2014-07-03T07:57:25Z

← Older revision		Revision as of 07:57, 3 July 2014
Line 1:		Line 1:
	==Introduction==		==Introduction==
	[[File:MP3-TF\|300px]]		[[File:MP3-TF.jpg\|300px]]

	This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>		This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>
Line 37:		Line 37:
	Here is guide illustrate you how to connect VS1053 breakout to Arduino Uno and play mp3 stored in your TF card.		Here is guide illustrate you how to connect VS1053 breakout to Arduino Uno and play mp3 stored in your TF card.

	[[File:MP3-TF\|300px]]		[[File:MP3-TF.jpg\|300px]]

	[[File:VS1053-sch.jpg\|450px]]		[[File:VS1053-sch.jpg\|450px]]

Admin at 07:56, 3 July 2014

2014-07-03T07:56:47Z

← Older revision		Revision as of 07:56, 3 July 2014
Line 1:		Line 1:
	==Introduction==		==Introduction==
	[[File:~~MP3_shiel3.jpg~~\|~~250px~~]]		[[File:MP3-TF\|300px]]

	This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>		This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>
Line 37:		Line 37:
	Here is guide illustrate you how to connect VS1053 breakout to Arduino Uno and play mp3 stored in your TF card.		Here is guide illustrate you how to connect VS1053 breakout to Arduino Uno and play mp3 stored in your TF card.

	[[File:~~MP3_shield4.jpg~~\|~~150PX~~]]		[[File:MP3-TF\|300px]]

	[[File:VS1053-sch.jpg\|450px]]		[[File:VS1053-sch.jpg\|450px]]

Admin at 07:48, 3 July 2014

2014-07-03T07:48:34Z

← Older revision		Revision as of 07:48, 3 July 2014
Line 15:		Line 15:
	*A single power supply: +5 VDC		*A single power supply: +5 VDC
	*12.288 Mhz crystal		*12.288 Mhz crystal
	*SD card slot		*TF card slot

	===Decodes formats ===		===Decodes formats ===

Admin at 07:41, 3 July 2014

2014-07-03T07:41:18Z

← Older revision		Revision as of 07:41, 3 July 2014
Line 1:		Line 1:
	==Introduction==		==Introduction==
	[[File:MP3_shiel3.jpg\|~~200px~~]]		[[File:MP3_shiel3.jpg\|250px]]

	This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>		This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>
Line 35:		Line 35:
	==Usage==		==Usage==

	Here is guide illustrate you how to connect VS1053 breakout to Arduino Uno and play mp3 stored in your SD card.		Here is guide illustrate you how to connect VS1053 breakout to Arduino Uno and play mp3 stored in your TF card.

	[[File:55.jpg\|~~500px~~]]		[[File:MP3_shield4.jpg\|150PX]]

	[[File:VS1053-sch.jpg\|450px]]		[[File:VS1053-sch.jpg\|450px]]


	After connecting your Arduino to the VS1053 breakout board, insert the TF card which stores your mp3 files with the filename like "track001.mp3", "track002.mp3" and etc into the SD card slot.<br>		After connecting your Arduino to the VS1053 breakout board, insert the TF card which stores your mp3 files with the filename like "track001.mp3", "track002.mp3" and etc into the TF card slot.<br>

	Download the [[File:MP3Shield_Library_Demo.rar]] and put them in the folder /Arduino1.0/libraries/, then open the Arduino IDE 1.0 and upload the examples MP3Shield-Library-Demo.		Download the [[File:MP3Shield_Library_Demo.rar]] and put them in the folder /Arduino1.0/libraries/, then open the Arduino IDE 1.0 and upload the examples MP3Shield-Library-Demo.

Admin at 07:34, 3 July 2014

2014-07-03T07:34:24Z

← Older revision		Revision as of 07:34, 3 July 2014
Line 1:		Line 1:
	==Introduction==		==Introduction==
	[[File:MP3_shiel3.jpg\|~~250px~~]]		[[File:MP3_shiel3.jpg\|200px]]

	This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>		This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>

Admin at 07:29, 3 July 2014

2014-07-03T07:29:42Z

← Older revision		Revision as of 07:29, 3 July 2014
Line 1:		Line 1:
	==Introduction==		==Introduction==
	[[File:~~MP3_shiel~~.jpg\|~~200px~~]]		[[File:MP3_shiel3.jpg\|250px]]

	This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>		This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>

Admin at 07:27, 3 July 2014

2014-07-03T07:27:04Z

← Older revision		Revision as of 07:27, 3 July 2014
Line 1:		Line 1:
	==Introduction==		==Introduction==
	[[File:MP3_shiel.jpg\|~~400px~~]]		[[File:MP3_shiel.jpg\|200px]]

	This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>		This MP3 shield board is designed based on VS1053B from VLSI. using this shiled you can plug in your arduino UNO/MEGA direcly as showing in pic, dont' need need to hook up with jumpers, it's becomes more easy to play music compared with the tiny mp3 breakout board. VS1053 is a versatile MP3 codec processor that is capable of decoding a variety of music formats,including Ogg Vorbis/MP3/AAC/WMA/MIDI audio. For the best headphone listening experience, the VS1053 includes EarSpeaker spatial processing which accurately simulates how a room with stereo loudspeakers would sound. In addition to being able to decode all major formats, VS1053 is capable of recording in Ogg Vobis file.<br>

	With the SD card slot on the other side of the board, you can play mp3 files from SD card using this breakout. It is easily to drop it in your project or make a mp3 player using your Arduino or other microcontroller. Features Can play a variety of music formats, support for OGG encoding real-time recording SPI interface, the control signal lines are led out A headphone and stereo output A microphone for recording A line_in input interface Power indicator 3.3V and 2.8V of LDO chip AMS-1117 on board, provides up to 800mA current A single power supply: +5 VDC 12.288 Mhz crystal TF cart slot. <br>		With the TF card slot on the other side of the board, you can play mp3 files from TF card using this breakout. It is easily to drop it in your project or make a mp3 player using your Arduino or other microcontroller. Features Can play a variety of music formats, support for OGG encoding real-time recording SPI interface, the control signal lines are led out A headphone and stereo output A microphone for recording A line_in input interface Power indicator 3.3V and 2.8V of LDO chip AMS-1117 on board, provides up to 800mA current A single power supply: +5 VDC 12.288 Mhz crystal TF cart slot. <br>
	==Features==		==Features==
	*Can play a variety of music formats, support for OGG encoding real-time recording		*Can play a variety of music formats, support for OGG encoding real-time recording
Line 42:		Line 42:


	After connecting your Arduino to the VS1053 breakout board, insert the SD card which stores your mp3 files with the filename like "track001.mp3", "track002.mp3" and etc into the SD card slot.<br>		After connecting your Arduino to the VS1053 breakout board, insert the TF card which stores your mp3 files with the filename like "track001.mp3", "track002.mp3" and etc into the SD card slot.<br>

	Download the [[File:MP3Shield_Library_Demo.rar]] and put them in the folder /Arduino1.0/libraries/, then open the Arduino IDE 1.0 and upload the examples MP3Shield-Library-Demo.		Download the [[File:MP3Shield_Library_Demo.rar]] and put them in the folder /Arduino1.0/libraries/, then open the Arduino IDE 1.0 and upload the examples MP3Shield-Library-Demo.
Line 50:		Line 50:


	Open the serial monitor with the baudrate 115200, input the number 'x' will play the corresponding mp3 file "track00x.mp3" in your SD card.		Open the serial monitor with the baudrate 115200, input the number 'x' will play the corresponding mp3 file "track00x.mp3" in your TF card.

	==How to buy==		==How to buy==
	Click here to buy: http://www.geeetech.com/arduino-mp3-shield-board-with-tf-card-p-604.html		Click here to buy: http://www.geeetech.com/arduino-mp3-shield-board-with-tf-card-p-604.html

Admin at 03:43, 15 May 2014

2014-05-15T03:43:17Z

← Older revision		Revision as of 03:43, 15 May 2014
Line 53:		Line 53:

	==How to buy==		==How to buy==
	[http://www.geeetech.com/~~vs1053~~-mp3-~~breakout~~-board-with-sd-card-p-~~611~~.html ~~Click here to buy VS1053 mp3 breakout with SD card]~~		Click here to buy: http://www.geeetech.com/arduino-mp3-shield-board-with-tf-card-p-604.html

Admin: /* Usage */

2014-05-06T07:58:17Z

Usage

← Older revision		Revision as of 07:58, 6 May 2014
Line 44:		Line 44:
	After connecting your Arduino to the VS1053 breakout board, insert the SD card which stores your mp3 files with the filename like "track001.mp3", "track002.mp3" and etc into the SD card slot.<br>		After connecting your Arduino to the VS1053 breakout board, insert the SD card which stores your mp3 files with the filename like "track001.mp3", "track002.mp3" and etc into the SD card slot.<br>

	Download the [~~http~~:~~//www.geeetech.com/Documents/MP3%20Shield%20Library%20Demo~~.rar ~~MP3Shield_Library_Demo~~] and put them in the folder /Arduino1.0/libraries/, then open the Arduino IDE 1.0 and upload the examples MP3Shield-Library-Demo.		Download the [[File:MP3Shield_Library_Demo.rar]] and put them in the folder /Arduino1.0/libraries/, then open the Arduino IDE 1.0 and upload the examples MP3Shield-Library-Demo.